leaking Toilet? Your Local Braeside Plumber Has You Covered!

Short answer is yes. A small, consistent leak, dripping just onceevery few seconds can waste hundrd of litres week. Added up overtime, definitely will incease your water bill.

There is a lot of possible causes of leaking toilet at the base. One of the common reasons is a worn out seal or perhaps tere could be a cracked toilet base.

One of your valves cold of deteriorated and requires replacing

Your flush valve could be faulty and causing the toilet to leak into bowl

First, don't panic! A leaking toilet can be a common household issue but it's crucial to address it promptly to prevent extensive water damage and costly repairs. Follow these steps to tackle the problem effectively: 

1. Turn Off the Water Supply 

Locate the shut-off valve behind your toilet and turn it clockwise to stop the water flow. This will prevent any further leakage while you work on identifying the issue. 

2. Investigate the Source of the Leak 

A toilet leak can stem from various parts such as the wax ring, tank bolts, or even the supply line. Conduct a thorough inspection to determine where the water is escaping. Hi-Tech Plumbing & Leak Detect offers advanced subsurface leak detection services that can help pinpoint difficult-to-find leaks. 

3. Assess the Damage 

Check the ceiling below for signs of water damage, including stains, sagging drywall, or peeling paint. If the damage appears serious, it's best to consult a professional plumber to assess the situation. 

4. Temporary Fixes 

While waiting for a professional, you can apply temporary fixes. Place a bucket under the leak and use towels to absorb any dripping water. Avoid using the toilet to prevent additional leakage. 

5. Call in the Experts 

For a permanent solution, it's advisable to hire professionals. Our local plumbers are well-equipped to handle such issues. Hi-Tech Plumbing & Leak Detect offers a variety of services from plumbing leak detection to sewer line leak repairs. With their non-invasive approaches and high-tech water leak survey equipment, they ensure an efficient and hassle-free experience. 

6. Prevent Future Leaks 

In addition to fixing the current leak, take preventive measures for the future. Regularly inspect your toilet and plumbing system, and consider scheduling a routine maintenance check with professionals. 

Once you suspect your toilet might be leaking, identifying the source of the leak is crucial. Let's dive into the steps you need to take: 

1. Remove the Toilet Tank Lid: 

Begin by carefully removing the lid from the toilet tank. This allows you to observe the internal components and pinpoint any potential issues. Handle the lid with care to avoid any damage. 

2. Check the Water Level in the Tank: 

Next, check the water level inside the tank. An optimal level is typically about an inch below the top of the overflow tube. If it's too high or too low, there might be a problem with the fill valve. 

3. Conduct the Food Coloring Test: 

Add a few drops of food coloring to the tank and wait for about 15 minutes without flushing. If colored water appears in the bowl, it means the flush is not sealing correctly, indicating a leak. 

4. Inspect the Base: 

Besides the tank, systematically inspect around the base of the toilet. A toilet leaking at the base is often due to a faulty wax ring seal or loose tee bolts. Tighten the bolts carefully but don’t overdo it as this could crack the toilet base. 

A common culprit for valve leaks is a worn-out or damaged fill valve. This valve is responsible for refilling the toilet tank after each flush. Over time, its components can degrade, leading to water seeping out. A faulty flush valve is another potential issue. The flush valves job is to allow water to flow from the tank into the bowl when you flush, then seal the tank once the bowl has enough water. If the flush valve doesn't seal properly, it can cause a perpetual leak.