Expert Edithvale Plumber:
top-rated outright plumbing maintenance

ITurn off the Water Supply: Locate the valves under your sink and turn them clockwise to close off the water. You don't want any surprise sprays!

1. Plug the Drain: Use a sink plug or a rag to cover the drain. This prevents any small parts from falling down the sink.

2. Disassemble the Tap: Carefully remove the tap handle by unscrewing it. Keep all parts organized to make reassembly easier.

3. Inspect the Components: Look for damaged or worn-out washers, O-rings, or cartridges. These are usually the culprits behind a dripping tap.

4. Replace the Faulty Parts: Take the damaged components to a hardware store to find the exact replacements. Install the new parts just as you removed the old ones.

5. Reassemble the Tap: Put the tap back together in the reverse order of disassembly. Ensure all parts are tightly secured.

6. Turn on the Water: Slowly turn the water supply back on and check for any leaks. Your tap should now be drip-free!

At Outright Plumbing Maintenance we understand the importance of ensuring your hot water system is running and functionable. Therefore, we offer same day hot water service replacements.

Yes, we can check for water leaks.

We can inspect and repair all types of water leaks

Turning off a water meter might seem daunting at first, but it’s a straightforward process that anyone can do with a bit of guidance. Whether you’re dealing with a plumbing emergency or just need to make some repairs, knowing how to turn off your water meter is an essential skill for any homeowner. Let's walk through the steps together, so you can handle this task confidently. 

First, locate your water meter. It’s often found in one of three places: 

• Inside your home – typically in basements, garages, or utility rooms.

• Outside – near the curb, or in a meter pit covered by a lid.

• In apartment buildings – usually in a utility closet or a common area.

Once you’ve found your water meter, the next step is to identify the shutoff valve. This valve controls the flow of water into your home and is usually positioned close to the meter itself. Look for a valve that looks like a lever or a spigot. Turning this valve will stop the water flow. 

If your valve is a lever type, turn it a quarter turn clockwise, until the lever is perpendicular to the pipe. If it’s a spigot type, turn it clockwise until it stops. Always remember, righty-tighty, lefty-loosey! 

After turning off the valve, open a faucet inside your home to check if the water has indeed stopped. If no water comes out, you’ve successfully turned off your water meter. If you’re still seeing water flow, double-check the valve position or reconsider if there might be another valve involved.

Yes, our technicians are fully equipped to asssit with all types of blocked sewer pipes on the spot.

Hot water is a staple in our daily routines, from brewing a perfect cup of tea to indulging in a hot shower after a long day. But have you ever paused to think about what temperature your hot water should be? Although it might seem trivial, the temperature of your hot water can greatly impact its effectiveness and safety. 

Understanding the ideal temperature range for various uses can lead to a more efficient and safe home environment. A general rule of thumb suggests keeping your water heater set to 49°C. This temperature is considered optimal because: 

• Energy Efficiency: Lowering the temperature can help reduce your energy bills without sacrificing comfort.

• Safety: It minimizes the risk of scalding accidents, particularly important for homes with children or elderly residents.

• Bacterial Control: It inhibits the growth of harmful bacteria such as Legionella, which thrive at lower temperatures.

As you consider the temperature setting that best fits your household needs, keep in mind both efficiency and safety. Striking the right balance is key to getting the most out of your hot water supply.