expert hot water services plumber: top rated

Is your hot water fluctuating? If this is happening, the tempering valve most likely needs replacing.

You can refer to your policy to find out specifically what is and what isn't covered under insurance. However, if your hot water service burst unexpectantly, most insurance companies will covered a proportion of the fees associated with the repairs. However, it is advised prior to engaging a licensed plumber to repair/replace, you should contact your policy provider first.

If you are unsure of what hot water system you currently have, you can email through photos to our team Maintenance@outrightplumbing.com.au and we will be able to provide you with this information.

Hot water services can last anywhere between 8-20 years. Regular maintenance and general check ups are required to ensure longevity.

There are several reasons why your hot water might be lukewarm instead of reaching the desired temperature. One common issue is a malfunctioning thermostat on your water heater. If the thermostat is not set correctly or is faulty, it may limit the heating capacity, preventing the water from getting hot enough. 

A malfunctioning heating element in an electric water heater could also be at fault. Electric heaters typically have two elements, one at the top and another at the bottom. If one of these elements fails, the water will not reach the expected temperature. Similarly, for gas heaters, issues with the burner or gas supply could lead to insufficient heating. 

Choosing the right hot water system involves several considerations, ensuring you get the perfect fit for your household's needs. Let’s break it down step-by-step. 

1. Identify Your Water Usage: Start by assessing your daily water usage. Think about how many people live in your home and their hot water habits. More people or frequent use may call for a larger capacity system. 

2. Consider the Types of Systems: There are several types of hot water systems to choose from: 

• Storage Tank Systems: These systems keep a tank full of hot water ready to use at any time. They’re ideal for households with constant hot water demands.

• Tankless or Instantaneous Systems: These heaters provide hot water on demand without storing it. Perfect for those wanting an energy-efficient option.

• Heat Pump Systems: These use electricity to transfer heat from the air or ground, a great eco-friendly choice.

• Solar Hot Water Systems: Harness the power of the sun. While initial costs are higher, they offer significant energy savings long-term.

3. Energy Sources: Determine what energy sources are available in your area. Options typically include electricity, natural gas, LPG, and solar. The availability and cost of these resources could influence your decision. 

4. System Size: Select a system size that matches your household demands without wasting energy. Consult the manufacturer’s guidelines or seek advice from a professional to find the right size for you. 

5. Efficiency and Cost: Look for energy-efficient systems that can reduce your utility bills over time. Compare the initial costs and potential long-term savings. Energy-efficient labels and reviews can provide helpful insights. 

Pro Tip: Check local rebates or incentives for energy-efficient systems, which can help offset the initial purchase cost. 

Still unsure? Reach out to a local expert to assess your home and provide personalized recommendations. Remember, making the right choice in a hot water system means comfort, convenience, and savings for years to come! 

When you're dealing with a plumbing issue or need to perform maintenance, knowing where the hot water shut off valve is can save you a lot of time and stress. Typically, this valve is located near your water heater. It's crucial to be familiar with its location to quickly stop the flow of hot water in case of an emergency. 

However, the exact location can vary depending on the type of water heater you have: 

• Traditional Tank Water Heaters: The shut off valve is usually situated on the cold water line that feeds into the top of the tank. Look for a valve that is usually within a few feet of the heater.

• Tankless Water Heaters: These may have the shut off valve located near the unit itself, often found right on the inlet pipe. Some models could have separate valves for both the hot and cold water.

If you're unsure about the location, tracing the water lines can often lead you straight to the valve. It's always a good idea to label it clearly once you find it.

Identifying the correct valve ensures you can swiftly turn off the hot water when needed, preventing damage and making it easier to tackle any plumbing tasks.

If you find yourself without hot water or you simply just want to upgrade your hot water unit, contact our friendly team today 03 9501 3777